You will see a detail of the castle.
Use a screwdriver to press this part towards the driver's seat, the lock will open.
Hood link replacement
Remove grille.
Loosen the hood latch bolt.
When the grille is removed, the thrust is visible (1) engine hood with its locking screw (2) near the hood lock, as well as the casing (2) cable traction
Straighten the end of the rod and pull it out.
Remove the unlocking handle in the lower driver compartment; Pull the hood linkage towards the passenger compartment.
Push the new rod through the rubber bushing located in the partition separating the interior of the car and the engine compartment. It should be pushed from the inside of the car.
Push the wire core of the hood rod by the bolt to the lock.
When you securely fasten the rod at the lock, keep in mind that the lock should not be in a tense state.
Bend the protruding end of the rod to the eye.
Visitor comments