Closer to the left doorway and, if necessary, at the center console (see fig. at the bottom) remove one screw at a time.
New design shown: 7 - left glove box; 8 - glove box with lid (9) and top panel (11); 10 - ashtray holder; 12 - damper (in the diesel model, the cold start accelerator link is located here)
From above, squeeze the drawer with force and pull it out of the instrument panel.
Move the glove box slightly to the left so that it can come out of the ledge on the right side.
Remove box.
Center console: Unscrew one Phillips head screw at the top of the center console on the right and left.
At the bottom, to the right of the accelerator pedal, unscrew the screw.
Unscrew another Phillips screw at the edge of the console closest to the handbrake lever.
Unscrew the gear lever button. And Remove the gear lever cover. and raise the console.
Right storage box: Remove left storage box and center console.
Remove the 4 Phillips screws at the top edge of the drawer (see fig.).
On the right, at the door, and on the left, at the heater, unscrew one more cross-head screw.
Open glove box lid.
unscrew four screws (with cross grooves) hinges.
Roof sheathing
In the described models "Volkswagen" roof sheathing is installed on wire braces.
Seat belts
If the belts have one of their shortcomings, they should be changed:
- wavy belt;
- frayed edges;
- worn fabric;
- the seams are torn.
Visitor comments