General description of a manual transmission Between the engine and the drive wheels there are devices that carry out power transmission. One of these devices includes a gearbox that is switched depending on road conditions,...
Shift Assembly Adjustment Set lever to position "neutral". Unscrew the head of the lever, pull the cover up and remove it. Loosen the shifter bolts. The rack must be adjusted so that its centering holes...
Switch shaft adjustment If shifting becomes inaccurate, the shift shaft of the transmission should be adjusted. To do this, turn the locking bolt of the switching shaft. Install the gearshift lever in...
Removal and installation of a transmission The vehicle must be supported in such a way that it is possible to work both in the engine compartment and at the bottom of the vehicle. The gearbox is pulled down. Disconnect the...
Replacing the release clutch (release bearing) It is not necessary to remove the transmission to perform this work. To get to the release clutch, you only have to tilt the gearbox. If there is sufficient freedom of movement,...
Noise in gearbox Over time, the gearbox draws attention to itself because of the noise. First you need to check the oil level in the gearbox. If there is a howling noise in a gear and the sound...
Automatic transmission — general information The automatic transmission works as follows: between the three-speed planetary gearbox and the engine is a torque converter in which the engine torque is transmitted to the paddle...
Checking automatic transmission shift modes Whether the automatic transmission correctly shifts to lower or higher speeds can be checked using the table. Subtract 5% advance from the speed readings on the speedometer. Hard...
Faults in the automatic transmission In the table you will find only those violations that can be eliminated by checking the oil level or by means of simple adjustments. If the malfunction cannot be eliminated using...
Removing the automatic transmission In this case, the same instructions apply as for dismantling a manual transmission. You work in the engine compartment and at the bottom of the machine. As already mentioned, the...
Main gear — general information The gearbox and main gear, together with the differential, are housed in one housing. The rotation from the engine through the gearbox, through the small and large gears is...