The windshield cleaner reservoir is located in the engine compartment next to the left wheel cover as shown above. The tank capacity is 4.2 liters.
Filling the tank
To fill the reservoir with cleaning fluid, simply lift the filler cap by the small tab. The tank must be filled to the top.
Since clean water is usually not good for cleaning glass, add a clean cleaning solution to the water.
In cold weather, use a windscreen cleaning solvent designed for use in winter conditions, even if your car is equipped with heated detergent injection nozzles. This will help keep the windshield clean and prevent the fluid from freezing in the winter.
Do not use antifreeze designed to cool the engine or any other solution that can damage the painted surface of the car.
After refueling the reservoir, push the cap down onto the filler neck.
Detergent injection nozzle adjustment
When the vehicle is stationary, the water must fall on the windshield as shown in the figure.
Adjust the nozzles with a needle.
Visitor comments