Jack and tools for self-maintenance

The jack, tools and the universal wheel cap wrench are pressed against the spare wheel rim with a rubber band. Screwdriver with double blade (flat blade on one end and Philips head on the other) inserted into the handle of the wrench. The jack must be fully lowered before being placed in storage.

Attention: Always check that the jack and tools are securely fastened. Otherwise, in the event of an accident, they may cause injury to passengers while moving forward.

Use the jack only to change wheels. Never use the jack to lift other vehicles or other loads to avoid an accident or injury.

Never use the jack as a support to work under the vehicle. If the jack is accidentally moved, you could be seriously injured.
Do not install the jack under the bumper, otherwise the bumper system may be damaged.

In addition, the jack may slip off the bumper, resulting in injury.

Do not place the vehicle on bricks, etc. Under the influence of such loads for a long time, they can crack.

Do not start the engine on a jacked up vehicle.

If it is necessary to work under the vehicle, be sure to use axle stands specially designed for this purpose to support it.