Removing the engine from the car 1. Disconnect the negative battery terminal. 2. Remove the engine chamber cover and place it in a safe place so as not to be scratched. 3. Drain engine coolant. 4. Place a...
Fuel Injected Engine — Extraction In models with fuel injection, the method of removing the engine is the same as described in the previous paragraph. Only with the difference that no attention is paid to the...
Engine equipment Parsing The engine fittings must be removed after removing the engine from the vehicle and disconnecting the transmission, but before dismantling it. The order of removal of...
Camshaft Disassembly To remove the camshaft when the engine is in the car, you must first perform the following steps: 1. Remove top distribution cover and valve cover. 2. Then remove the...
Engine head Disassembly If the head is removed from the engine in the car, it is best to remove it together with the drive and output manifolds. The manifolds can be detached after removing...
Valve clearances — adjustment 1. Before installing a new or remanufactured engine head along with the camshaft, the valve clearances must be adjusted. 2. Valve clearances can be checked and adjusted if...
Removing pistons and connecting rods 1. Remove the engine head. 2. Remove the oil pan. 3. Unscrew the two bolts securing the oil pump, then remove the pump along with the suction tube from the crankcase. 4. During...
Installing the engine in a car When installing the engine and gearbox, follow the reverse sequence when removing the engine from the vehicle. You need to pay attention to the following points: A) When lowering...
Distribution belt and distribution gears If the engine is in the vehicle, the following steps must first be performed: 1. Disconnect the wire to the battery ground. 2. Remove alternator V-belt. 3. Unscrew and remove the...