Engine equipment

Parsing

The engine fittings must be removed after removing the engine from the vehicle and disconnecting the transmission, but before dismantling it. The order of removal of equipment elements is arbitrary.

1. Remove alternator and V-belt.

2. Unscrew and remove the drive manifold and carburetor or drive manifold and throttle body on fuel injected models.

3. Remove the exhaust manifold.

4. Remove the fuel pump.

5. Remove the heating valve in models with fuel injection.

6. Remove the ignition device.

7. Remove the oil filter with oil cooler (if available) and oil filter bracket.

8. Unscrew the oil pressure and coolant temperature sensor, marking their locations.

9. To turn away an arm of the generator and to remove together with the water pump.

10. Unscrew the outlet pipes of the cooling system from the head.

11. Remove the cord, in models with a manual transmission, then remove the protective plate. On models with automatic transmission, unscrew the drive disk from the crankshaft, marking the relative position on the spacer and shim.

12. Remove the four bolts securing the engine rear bracket to the block.