Door handle — removal and installation Removing Use a small screwdriver to separate the door handle trim by prying up on the trim from the rear of the handle. Remove two screws (pic. 461). Move the door handle with...
Door lock cylinder — removal and installation Removing Remove the door handle. Insert the key into the lock. Loosen the Phillips screw. Remove the door lock cylinder eccentric and spring. Attention! Be aware that the spring...
Door lock cylinder — replacement and repair Replacement Using the key number at service stations, you can, having a repair kit for the door lock cylinder, assemble a cylinder suitable for the car. The key number is printed...
Internal door handle Removing Remove an internal upholstery of a door. Take out from an aperture on the panel of a door a lock level. Pull forward and remove the handle along with its trim. Disconnect...
Door window glass replacement Removing Remove an internal upholstery of a door. Carefully peel off the protective film so as not to tear. Lower glass 5 (pic. 465) or 9 (pic. 466) and disconnect it from the...
Window regulator without electric drive Removing Remove an internal upholstery of a door. Remove the protective film. Lower and unscrew glass 5 (see fig. 465) or 9 (see fig. 466) windows from the glass lifting...
Power window mechanism Attention! The power window switches on the center console can be pulled forward if necessary. Removing Lower the glass a little. Remove an internal upholstery of a door. Remove...
Replacement of windshield and side windows If the rubber seal is reinstalled, clean the seal of dirt and glass residue. Apply a seal around the glass. If there is a lock, insert it into the rubber seal. Clean the glass...