Installation and adjustment of the hood lock

Install and screw the top cross member.

Secure the top of the radiator to the rubber mounts.

Connect the headlight and horn connectors.

Attach the engine compartment hood latch cable and secure the cable to the top cross member.

Screw the bottom panel together with the air duct grille and spoiler.

Install the grille.

Install the bumper.

Close the engine compartment hood.' Check the fixation of the lock and the coincidence of the height of the hood with the front fenders.

Adjust locking rod if necessary (pic. 459) with a screwdriver and a wrench so that it is completely clicked into the lock of the engine compartment hood and that the hood is flush with the front fenders (check for gaps).



Loosen the left and right rubber stops on the lock panel until the hood is flush with the front fenders. In conclusion, once again check the locking mechanism of the engine compartment hood.