General description of onboard electrical equipment The described models of the VW Golf II / Jetta II have a twelve-volt electrical equipment with negative terminals of sources and consumers of electricity connected to «weight». An...
Headlight adjustment The headlights are adjusted from the engine compartment. Top screw 6 (pic. 453) serves to change the vertical adjustment of the light beam, the lower screw - horizontal. Pic. 453....
Headlight lamp banners From the side of the engine compartment, remove the casing by turning it to the left. Push the bulb in and turn to the left, and then pull it out. Install the lamp in reverse...
Wiper — design description The arrangement of the wiper mechanisms is shown in fig. 454 and 455. Based on these illustrations, all actions related to the replacement of mechanisms can be performed. Pic....
Replacing fuses In order to avoid damage to wires and electricity consumers during short circuits and overloads, individual electrical circuits are protected by fuses. Before replacing a fuse,...
Use of electrical diagrams The charts are plotted with horizontal coordinates. If the chain is interrupted by a square with a number inside it, then that number indicates the coordinate of the connection....
Electrical circuit structure Consumer circuit with switching All switches and contacts are shown in de-energized positions. «Weight» car The numbers in the circles indicate where the circuits are connected to...