Engine lubrication system — design description Lubrication system - with forced oil supply to rubbing surfaces. The oil pump is mounted behind the drive sprocket and is chain driven from the crankshaft. The chain must be well...
Replacing the oil pan The need to remove or replace the sump may arise in the event of oil leakage through the gasket or in the event of a sump breakage (cracks, crumples) as a result of hitting an...
Oil pump replacement Drain the engine oil. If the oil has not been used for a very long time, it can be collected for reuse. Loosen the alternator mounting and remove the V-belt. Remove the upper belt...
Oil pump adjustment Inspection of the pump parts is necessary when determining the causes of a drop in pressure in the lubrication system. To gain access to the parts of the pump, it is necessary to...
Oil filter replacement The oil filter is replaced according to the intervals specified in the service manual, either during any engine repair or when changing the oil. To remove the filter, a special...
Oil pressure check VW Golf 11 cars have several sensors for signaling a pressure drop in the lubrication lubrication system: 1) the main sensor with a brown body, which is triggered at P=0.3 kg/cm 2...