Description of the design of the engine lubrication system The lubrication system operates under pressure created by a gear-type oil pump and, in addition to the pump, contains an oil filter connected in series with the main engine oil...
Replacing the oil pan Oil pan 15 ( rice. 224 ) can be replaced without removing the engine from the vehicle. After draining the oil, a number of simple operations should be performed. The engine must...
Oil pump replacement Remove the oil pan. Loosen the pump housing mounting bolts. Lower the pump down until the shaft is free of teeth and remove the pump completely Unscrew the fasteners of the vacuum...
Oil pump repair Using rice. 224 , remove the oil pump. Unscrew the bolts securing the pump housing cover and remove it with the oil intake and filter mesh. If necessary, remove the oil pickup by...
Oil filter replacement Below will be recommendations only for replacing the oil filter of the main engine oil line. Instructions for replacing the oil cooler filter will be given in the next paragraph....
Oil cooler replacement The location of the oil cooler is shown in rice. 224 . To replace the oil cooler, do the following: Loosen the oil filter. Using a wrench, unscrew the nut located under the bottom...
Oil pressure check The pressure in the engine lubrication system is measured using a pressure gauge, which must be equipped with a threaded fitting that is screwed in instead of the oil pressure...