Gearbox replacement The five-speed gearbox installed on cars with 1.3-liter gasoline engines has catalog number 085. Removing and installing the gearbox is the same as in the case of a four-speed...
Gearbox disassembly When disassembling the gearbox, the following instructions must be observed: After dismantling the box, check the condition of the oil. Always replace all cardboard gaskets as...
Dismantling the input shaft Press out shaft 18 (pic. 322) from the synchronizer 13, holding the synchronizer holder by the groove in the holder with the device. Press the 6th gear and its bearings off the...
Dismantling the output shaft A set of parts for the V transmission assembly installed on the other side of the crankcase is removed in advance. Install the output shaft under the press, placing the plate...
Gearbox Assembly In the case of replacing the primary or secondary shafts, it becomes necessary to adjust the position of the secondary shaft. Installation of the secondary shaft is carried out in...
Disassembly of the differential mechanism The design of the differential mechanism is the same as in the case of the four-speed gearbox models 084 ( see fig. 304 ). The difference is the method of installing the ring gear...
Installing the Gear Selector The outer part of the gear selector has a design similar to the mechanism of the four-speed gearbox model 084 ( rice. 310 ). To adjust it, you need to loosen the connections shown...