Gearbox adjustment

Adjustment of the components and parts of the gearbox after its assembly is necessary in case of replacing a number of components and parts shown in Table. 21. It should be remembered that all taken (if they were previously installed) should be put in their place. Adjustments will require special tools.

Table 21

Components or parts to be replaced	Adjustable units and parts
gearbox housing	Differential housing
Clutch side gearbox housing	Input shaft and differential housing
Differential housing bearing	Differential housing
The crown of the driven gear of the final drive and the secondary shaft	output shaft
Differential housing	Differential housing
Output shaft bearing	output shaft

Adjustment of play of a primary shaft. With a five-speed gearbox, it is not necessary to adjust the play of the input shaft. But during assembly, you must return to place all the previously removed (if they were installed) adjusting washers.

Adjustment of backlash of a secondary shaft. Look Here.

Differential housing adjustment. Look Here.