Refinement of brake discs rear wheel brakes

If necessary, the brake discs can be further sanded to be used again. At the same time, it is necessary to pay attention to the minimum thickness indicated in the table of dimensions and adjustment parameters, which must be observed when carrying out grinding work. Also pay attention to the flatness of the surface of the brake discs, i.e. they must be sanded so that both sides are parallel to each other.

In the event that the brake disc is suspected to be damaged, the runout of the outer edge can be checked using a dial gauge.

To remove the brake disc, remove the brake seat without blocking the brake hose. After this, remove the brake disc.