Geometric design of the rear wheels

The geometry of the rear wheels cannot be adjusted. In the case of testing after an expected and actual accident, the following parameters are acceptable. If there are deviations, carry out conventional measurements of the parameters of the vehicle or send it for such measurements. The following indicators must be met.

Measurement parameters

Camber for a car with engine power:

• up to 66 kW — 30'±20'
• more than 66 kW — 40'±20'
• Difference between sides - 30'
• Toe-in of rear wheels — 0°±10'

Longitudinal inclination of the king pin for a car with an engine power:

• up to 66 kW — 1°45'±30'
• more than 66 kW — 3°25'±30'
• Difference between sides — Maximum 1°