Front wheel suspension. general information

The front suspension consists of suspension struts with integrated shock absorbers, a wishbone and an integrated anti-roll bar. Between the lower transverse arm on each side and the anti-roll bar is a connecting hose. The hose is screwed to the transverse arm and sits freely in the mounting hole on the front side. Pay attention to the diameter of the stabilizer bar. Both wishbones are bolted to the inner side of the subframe and are connected to the wheel bearing housing by means of a screwed ball joint on the outside. with pivot pin. The bearing housings are connected by stakes to the suspension struts by means of two screws with pins. It must be taken into account that these screws affect the camber of the front wheels, i.e. when separating parts, note the position of the screws before unscrewing and knocking them out.