The headlight adjustment device is located on the inside of the engine section. Two adjustment wheels can be seen on the back of the headlight, I adjust them. however, from the front of the vehicle. The figure shows the right headlight. In the left headlight, both wheels are mirrored relative to the right.
Headlight adjustment must be carried out using a special adjusting device. attempting to adjust or change headlight alignment should only be done in an emergency. To make the adjustment, steer the vehicle perpendicular to the garage door or wall and turn on the headlights. The distance to the wall or door should be about 5 meters.
To adjust the headlight, insert a Phillips screwdriver into the hole above the headlight. To avoid damaging the rim of the adjusting wheel, use a fairly small screwdriver.
If you insert a screwdriver into the hole 2. and turn the wheel to the right, the light from the headlight falls upwards. If you insert it into hole 1 and turn the wheel to the right, the headlight beam moves horizontally towards the middle of the car. Turning the wheel to the left does the opposite.
Visitor comments