Elements of the heating and ventilation system 1 - side window blowing nozzles; 2 - front nozzles; 3 - windscreen defrost nozzles; 4 - heater control panel; 5 - spacer; 6 - transverse beam of the instrument panel; 7 - pollen...
Removing and installing air nozzles 1. Using pliers, pulling up, remove the air supply nozzles to the side windows from the instrument panel. 2. To remove the center air nozzles, use a special tool with a hook or...
Installing the central damper lever Mounting marks When installing the central damper lever, it is necessary to align the marks (shown by arrows) on the lever and gear. There is a timing mark on the gear wheel of...
Removal and installation of the heater control unit Using Special Tool 3370 to Remove the Heater Control Unit Trim Panel Location of screws for fastening the heater control unit The fastening screws are shown by arrows. Checking...
Vehicle interior ventilation The location of the ventilation grill on the car 1 - working edges; 2 - ventilation frame The air from inside the car is removed through the ventilation openings in the lining of...
Air recirculation valve actuator 1 - electrical connector; 2 - executive engine; 3 - screw Removing 1. unscrew the screw (3) actuator motor mounts. 2. Move the executive motor down and disconnect it from the air...
Air conditioning system Air conditioning system diagram 1 - compressor; 2 - air conditioner compressor rotation speed sensor; 3 - electromagnetic clutch; 4 - oil drain plug; 5 - overpressure valve; 6 -...
A/C compressor brackets Warning: Do not open the refrigerant circuit of the air conditioning system. Avoid skin contact with refrigerant. The A/C compressor brackets can be removed and installed without...