Replacing the rubber bands of the wiper blades Regularly check the efficiency of the wiper blades. The friction of the wiper blades on the icy surface of the glass leads to damage to the rubber bands of the wiper blades. Wipe...
Windshield washer nozzle adjustment Proper spraying of liquid on the windshield If the jet of liquid sprayed by the nozzles is at different heights of the windshield (A and B), the washer nozzles need to be...
Removal and installation of windshield washer nozzles The direction of pressure on the windshield washer nozzles to remove it from the hood 1 - washer nozzles; 2 - an arrow indicating the initial pressure of the nozzle; 3 - nozzle...
Removal and installation of wiper arms Removing 1. Moisten the windshield with water, then turn the wiper on and off until the wiper arm is in its original position. 2. Remove the ground wire from the battery. 3....
Removal and installation of the windshield wiper motor Location of screws and seals of the bulkhead of the engine compartment 1 - seal of the partition of the engine compartment; 2 - screws Arrangement of nuts of fastening of drafts...
Removal and installation of tanks and washer pump Location of the washer reservoir nut The fastening nut is shown by an arrow. The washer reservoir is located in the front right side of the engine compartment. Removing 1. Unscrew...