- seat back in a position close to vertical;
- feet are comfortably on the floor;
- while the seat is moved back as far as possible.
Fore and aft seat adjustment (1)
Pull the handle up and slide the seat. Then release the handle and move the seat a little more until the latch is activated.
Warning: For safety reasons, the driver's seat must only be adjusted longitudinally when the vehicle is stationary!
Seat back release (only two-door cars) (2)
Pull the handle up and tilt the backrest.
Warning: For safety reasons, the backrests of the front seats must always be locked while driving!
Position for easier entry into the vehicle (only two-door cars) (2)
This position makes it easier to get into the back seat. Pull the handle up and fold the backrest forward. At the same time, the seat cushion rises slightly and also moves forward.
Warning: For safety reasons, the backrests of the front seats must always be locked while driving!
Lumbar support adjustment (3)
By turning the handwheel, the center of the seatback becomes more or less arched. In this way, the most favorable position of support for the spinal column should be found in order to avoid fatigue during long trips.
Seat back tilt adjustment (4)
Lean back and turn the handwheel.
Warning: The seat backs must not be tilted too far back while driving, as this significantly reduces the effectiveness of the seat belts.
Seat height adjustment (5)
By moving the handle on the outside of the seat up and down, the seat is raised and lowered.
Raising: pull the handle from the basic position up and do "pumping up" movement.
Lowering: push the handle down from the basic position and do "pumping up" movement.
Warning: For safety reasons, seat height adjustments should only be made when the vehicle is stationary.
Warning: Be careful when adjusting the seat height! With an inattentive or careless attitude to the case, you can get a bruise.
Seat cushion adjustment
seated type "Recaro" You can adjust the position of the front of the seat cushion. To adjust the seat cushion, pull the release button under the seat in the direction of the arrow and slide the cushion to the desired position.
Visitor comments