Checking shift cable adjustment

Order of execution

1. Move the selector lever from position "R" while pressing the lock button 5 mm back and release it. In this case, the lever should independently return to its original position and lock.

2. selector lever out of position "N" while pressing the lock button, move 5 mm and release. In this case, the lever should return to its original position and lock.

3. If the selector lever is firmly locked, no further adjustment is required.

4. Make a test drive and check the operation of the selector lever. It is allowed to start the engine only when the selector lever is in position "R" or "N".

5. Turn on the ignition. In a stationary vehicle, the selector lever can only be moved from positions "R" And "N", if you press the brake pedal at the same time.