Removal and installation of a power shaft Drive shaft with constant velocity ball joint 1 - self-locking twelve-sided nut. At installation it is necessary to use a new nut; 2 - right drive shaft; 3 - bolt with an internal...
Replacing the protective covers of the drive shaft In the event of cracks or ruptures in the protective cover of the drive shaft, it must be replaced immediately. Warning: Depending on vehicle modification, the driveshaft inboard...
Mounting position of disc springs Installing the Inner Pivot Belleville Spring When installing a belleville spring (1) inner hinge larger diameter should be directed outward. Installing the Outer Pivot Belleville...
Filling joints with grease Filling the CV joint with grease VW-G000603 External hinge, diam. mm Total amount of grease in hinge In a protective case 81 80 g 40 g 40 g 90 120 g 80 g 40 g Internal hinge,...
Drive shaft failures Vibration and increased noise when starting off, engine braking and sharp turns occur when the constant velocity joints, shaft splines are worn out and when the wheel bolts are...