The interior also includes the door glass frame. The outer part of the door is a metal lining of the inner part.
Both parts are connected with bolts. On the outer part, the outer door handle is installed, the sealing strip of the window opening (see illustration 59.0).
59.0. front door components. Golf Cars
1 - the outer part of the door
2 - lining of the connecting edge
3 - six bolts, type C. Tightening torque 10 Nm
4 - rear mounting plate. Glued to the wrist of the door
5 - three bolts, type A. Tightening torque 10 Nm
6 - bolts, type B. Tightening torque 14 Nm. Two-door cars have 11 of them, and four-door cars have 10 pieces
7 - the inside of the door
8 - front mounting plate. Glued to the outside of the door
9 - noise-absorbing insert
10 - six clamps
11 - sealing strip of the window opening
Attention! To fasten the outer and inner parts of the door, three types of bolts are used, which are not interchangeable and should only be installed in their mounting locations (see illustration 59.0a).
59.0a. Types of door connecting bolts
A - with a pointed rod and a thick washer
B - a blunt rod with a thick washer
C - with a pointed shank and a thin washer
Visitor comments