Attention! The accompanying illustrations show the steering column trim on Golf vehicles. Removal and installation of facing at cars Touran are carried out in the same sequence.
Removing
1. Disconnect the battery.
Attention! Familiarize yourself with the safety precautions for working on the airbag.
2. Remove the airbag unit from the steering wheel.
3. Lower the steering wheel and pull it out as far as it will go.
4. Remove the steering wheel.
5. Release the pad 1 above the connecting joint on the steering column from the fastening (see illustration).
6. Release the upper part 2 of the steering column lining from the lower part 3 and remove it (see illustration 10.5).
7. Move the steering column lock lever to the lower position.
8. Unscrew bolt 4 (see illustration).
9. Unscrew two screws 5, release the lower part 3 of the lining from the fasteners and remove it from the steering column (see illustration 10.8).
Facing is installed in the reverse order of removal.
Visitor comments