Rear view mirror without rain sensor. Golf Cars
Removing
1. Rotate mirror 1 by 90°counterclockwise from the mounting position and detach it from the mounting plate (see arrow in illustration).
The mirror is installed in the reverse order of removal.
Mirror with rain sensor
Removing
2. Turn off the ignition and remove the key from the lock.
3. Use a plastic wedge 5 to press the clamp 1 on the right protective cover 2 (see illustration).
4. Separate covers 2 and 3 and remove them from the mirror mounting support (see illustration 2.3).
5. Remove plug 4 from the mirror support and disconnect it (see illustration 2.3).
6. Release the mirror support together with the mirror from the mounting plate, pushing them parallel to the windshield (see arrow in illustration 2.3).
Installation
The mirror is installed in the reverse order of removal.
Mirror with and without rain sensor. Touran cars
Removing
7. Mirror rain sensor. Switch off the ignition and remove the key from the lock.
8. Squeeze out the mirror support cover with a plastic wedge and remove it from the ceiling. Pry off the cover with a wedge from the sides.
9. Push the mirror 1/2 down with a certain amount of force, (see arrow in illustration) and release it from the mount.
10. Mirror with rain sensor 1. Disconnect plug 3 (see illustration 2.9).
Installation
11. Mirror rain sensor. Connect the plug.
12. Secure the mirror support with the right mounting lug in the holder. At the same time, ensure that the mounting spring 4 fits between the left mounting lug and the mirror support (see illustration 2.9).
13. Press the mirror support vertically up until it locks into the holder.
14. Close the mirror support with a cover.
Visitor comments