Activation of the burglar alarm
1. Lock the car.
Turning off the alarm
2. Unlock the vehicle with the unlock button on the remote or insert the key into the ignition.
Unlocking the car with a mechanical key (emergency)
If the remote control of the locks does not work, then the car must be unlocked with the key. This is done in the following way:
3. Pull the key out of the handle.
4. Unlock the car with the mechanical key. The burglar alarm remains activated, but does not activate the alarm mode.
5. Within the next fifteen seconds, turn on the ignition.
When the ignition is turned on, the anti-theft system recognizes the key in the lock and deactivates the burglar alarm.
If the ignition is not turned on, then after fifteen seconds the alarm mode is activated.
Thanks to the security alarm system, unauthorized entry into the car interior, theft and theft are difficult.
When unlocking the car with a mechanical key and unauthorized entry into the car, sound and light alarms are activated.
The burglar alarm activates the alarm mode when the following actions are performed with the car locked:
- The car was unlocked with a mechanical key and the ignition was not turned on for the next fifteen seconds.
- When opening one of the side doors.
- Opening the hood.
- Opening the back door.
- Turning on the ignition.
- When driving in the cabin (with interior sensors).
- When trying to tow a vehicle (when equipped with appropriate sensors).
- When you try to put the car on a tow truck (when equipped with appropriate sensors).
At the same time, sound signals are given for half a minute and the direction indicators flash.
The security system continues to function when the battery is disconnected or when it is discharged.
Visitor comments