- 0.65 liters Haldex differential oil;
Attention! The oil filling capacity for the Haldex differential is 0.85 liters.
- O-rings for the drain and vent plugs of the Haldex differential.
Required tools and equipment: Suitable container for collecting oil.
Change of oil
Attention! Jacking up and jacking up a car is dangerous. Therefore, it is recommended that you familiarize yourself with the safety precautions outlined in chapter «car jacking».
1. Jack up the vehicle and place it on jack stands.
2. Place a prepared container under the differential to collect the oil.
3. Unscrew the screw plug from drain hole A and allow the oil to drain (see illustration).
4. Screw the plug into the drain hole, having previously replaced the old sealing ring with a new one, and tighten the plug with a force of 30 Nm.
5. Unscrew the plug from the filler hole B (see illustration 19.3).
6. Cut the tube (tip) oil filling containers (oilers) up to 50 mm (see illustration).
7. Insert the tip of oiler A into the drain hole and pour oil into the differential until it reaches the lower edge of the filler hole (see illustration).
The oil level in the differential is normal if at an oil temperature of +20°...40°C it is near the lower edge of the filling hole.
8. Screw the plug into the filling port, replacing the old O-ring with a new one, and tighten the screw plug to 15 Nm.
9. Lower the car on wheels.
Visitor comments