Engine cooling system Coolant circulation To cool the engine, the coolant constantly circulates in the circuit, pumped by the water pump. While the engine is not warmed up, the coolant circulates only...
Coolant — replacement The coolant should be changed only after the repair of the cooling system, for which the coolant had to be drained. The coolant is not replaced as part of maintenance. If during...
Thermostat — removal and installation Vehicles with 1.6 liter BGU/BSE/BSF petrol and diesel engines. Removing 1. Drain the coolant. 2. Vehicles with a diesel engine. Remove the generator, see the relevant chapter. 3....
Thermostat — check All vehicles except vehicles with 1.4-/1.6-litre FSI engine. Examination 1. Remove the thermostat. 2. Measure your height «A» thermostat (see illustration). 3. Heat up the...
Water pump — removal and installation Vehicles with 1.4-/1.6 liter FSI engine BKG/BLN/BAG/BLF/BLP. Attention! Other engines require the timing belt to be removed before removing the water pump. For this reason, the...
Radiator — removal and installation Removing Attention! This chapter covers 1.4 liter BCA, 2.0 liter AXW/BLR/BLX/BLY, 2.0 liter BDK diesel engines (see illustration 6.0). Differences inherent in other types of...
Radiator blower fan — removal and installation Attention! This chapter covers 1.4 liter BCA, FSI 1.4-/1.6 liter BKG/BLN/BAG/BSE/BSF, 1.9 liter diesel engines. Differences inherent in other types of engines are listed...
Heater and air conditioner Heating of salon is carried out by the air which is soaked up outside. Outside air is taken in by an electric fan and passes through a dust filter (air cleaner before entering the...
Outside temperature sensor — removal and installation Removing The outside air temperature sensor is located on the back of the bumper in front of the radiator. 1. Remove the bumper, eat. corresponding chapter. Attention! It is not...
Central deflector — removal and installation Removing 1. Vehicles without Climatronic. Remove lining 1 from pocket 3 (see illustration). 2. Unscrew the two screws 2 and remove the pocket 3 from the instrument panel (see...
Side deflectors — removal and installation Removing 1. Using a screwdriver or a plastic wedge, e.g. HAZET 1965-20, vent 1 on the side and release it from the instrument panel (see illustration). Attention! Place a soft pad...
Interior air vents — removal and installation Touran cars. Central deflectors 1. Remove the radio/heater panel, see relevant chapter. 2. Lift up the cover of the pocket on the instrument panel and unscrew the fastening...
Temperature damper cable Removal and installation Golf/Touran vehicles without air conditioning. Removing 1. Remove the block of switches of a heater/air conditioner from the panel of devices. 2. Remove the air damper flexible...
Air distribution damper actuator — removal and installation Golf cars without Climatronic. Attention! Do not change the damper position during work. 1. Disconnect the battery. 2. Remove a ware box, the corresponding chapter see. 3. Remove...
Heating element — removal and installation Golf vehicles with diesel engine. Removing Attention! Let the heater cool down before starting work. 1. Disconnect the battery. 2. Remove an overlay from below of the panel of...