General information about automatic transmission Instead of a manual transmission, Golfs can be equipped with an automatic transmission. In this case, at the beginning of the movement, the automatic transmission performs all the...
Checking the automatic transmission control mechanism The starter must not operate when the gear lever is in the positions «R», «D» or «S». When the mode is turned on «N» while driving at speeds above 5 km/h, the selector lever lock...
Installing the shift cable 10. Loosen the cable adjustment screw. Attention! Do not lubricate the cable. 11. Lay the cable, avoiding its tension, fix it in the bracket on the box, but do not fix it. 12. Fix...
Shift Cable Adjustment The selector cable must be adjusted after carrying out work in which the cable was disconnected. 16. Move the gearbox control lever to the position «R» and loosen the bolt 2...
Transmission pan and oil intake — removal and installation 1. Remove the engine mudguard. 2. Attach a VAG 1306 oiler to the hood with gear oil of the required specification. 3. Unscrew plug A from the control hole (see illustration),...
Multifunction switch — removal, installation and adjustment Removal and installation 1. Set the gear lever to the position «N». 2. Turn off the ignition. 3. Squeeze the latch arms 3 (see illustration), pull the shift cable out of the...
Valve body and sensors — removal and installation 1. Disconnect the wire terminal «masses» (-) from the battery. 2. Remove the transmission pan and oil pickup. 3. Mark the mounting position of all sensors and solenoid valves, as...