2. Unscrew nut 16 and remove bolt 4 (see illustration).
2.2. Clutch pedal mount
1 - bracket mounting support
2 - gasket. To be replaced after each disassembly
3 - clutch pedal axle bracket
4 - bolt
5 - spring
6 - sleeve
7 - pedal axis
8 - clutch pedal
9 - latch
10 - sealing ring. To be replaced after each disassembly
11 - master cylinder
12 - clutch pedal position sensor
13 - latch
14 - hose
15 - nuts. Tightening torque 25 Nm. The nuts are self-locking and must be replaced after each dismantling
16 - nut. Tightening torque 25 Nm. The nut is self-locking and must be replaced after each dismantling
17 - pedal stop
3. Move the pedal a little forward and remove the spring 5 from the bracket (see illustration 2.2).
4. Remove the master cylinder retainer with pliers.
5. Remove the clutch pedal from the bracket.
Installation of a pedal is carried out in sequence, return to removal.
Visitor comments