2. Disconnect from the central console a cover of the lever of a gear change and, having displaced it upwards, put on it on a lever head.
3. Loosen the clamp and remove the spherical head together with the cover from the gear lever.
4. Remove if there is a sound deadening pad.
5. Remove the rear of the center console.
6. Unscrew nuts of fastening of the case of the lever of a gear change (see illustration). On models with 02S gearbox, remove the air filter.
7. Remove the circlip 3 of the shift cable 1, and then remove the circlip 4 of the gear selection cable on lever 2 and disconnect the cables (see illustration).
8. Unscrew bolts of fastening of an arm of cables of a gear change (see arrows in illustration). On models with 02S gearbox, first remove hose A from bracket B.
9. Disconnect the front exhaust pipe together with the pre-catalyst.
10. Remove the heat shield.
11. Remove the gearshift lever and cables by pulling them down.
Installation is carried out in the reverse order of removal.
In this case, it should be borne in mind that the holes on the tips of the gear shift cables have different diameters, which ensures their desired installation.
Lubricate the mounting pins with a thin layer of grease G 000 450 02 before installing the cables.
12. Replace the old circlips and retainers with new ones.
Visitor comments