Car front suspension Volkswagen Passat B2

Specifications of the front suspension
Front suspension independent type «rocking candle» with hydraulic telescopic suspension struts, helical coil springs, lower wishbones and anti-roll bar (except for vehicles with...

Specifications of the front wheels
Front wheel alignment The angles of the front wheels are checked on the car in running order with normal tire pressure, in the absence of excessive play in the nodes and parts of...

Tightening torques of the main threaded connections, kgf.m
Nut of fastening of a shock-absorber rod to the top support: 5,0. Rack body nut: 15.0. Nut of a bolt of fastening of the suspension arm to a stretcher: 6,0. Nut of a bolt of...

Removal and installation of shock absorbers and springs
Removing Loosen the wheel hub nut. Hang the front of the car and remove the wheel. On vehicles with ATE brand front wheel brakes, remove the brake caliper and brake hose bracket....

Removal and installation of the stabilizer bar
Vehicles with mechanical steering and power steering release before January 1984 Removing the anti-roll bar is not particularly difficult. Before installing the stabilizer, hang...

Front wheel alignment
Before checking and adjusting wheel alignment, you must: park the car on a level surface; check the air pressure in the tires and, if necessary, bring to normal; make sure that...

Checking and adjusting the toe-in of the front wheels
Check and, if necessary, adjust the wheel alignment as follows: set the steering to the straight ahead position; halve the nominal value of the toe angle and adjust the toe angle...

Checking and adjusting the camber of the front wheels
Check and, if necessary, adjust the camber of the front wheels. The camber angle is adjusted by moving the ball joints of the suspension arms in the oval holes of the arms without...

Checking the longitudinal angle of the rotation axis
The longitudinal angle of inclination of the axis of rotation is not adjustable. If it is out of specification, check the condition of the front suspension components and parts...

Disassembly and assembly of the front wheel hubs
Remove the telescopic pole as described above. Remove the brake disc from the hub. Remove the protective cover attached to the suspension spring. Using a press, press the wheel...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Passat B6 Passat B5 Passat B4

Passat B3 Passat B2