Remove hub cap, cotter pin 1 (see photo) and toothed stop 2.
Loosen the hex nut and remove the lock washer 3.
Insert a screwdriver into the threaded hole for the wheel bolt and move up the automatic adjustment bar between the brake shoes and the brake drum with a screwdriver.
Remove the hub, made integral with the brake drum, making sure that the inner races of the bearings do not fall out.
The hub is installed in the reverse order of removal, taking into account the following:
- before installing the hub, put universal grease in it;
- adjust the clearance in the hub bearings and install a new cotter pin.
Visitor comments