Device
The electronic ignition system includes an ignition distributor with a built-in proximity sensor (pulse generator), switch and high energy ignition coil.
Like the distributor of the contact ignition system, the sensor-distributor of the electronic ignition system has centrifugal and vacuum ignition timing controllers. The non-contact sensor assembly with the base plate and toothed armature has the ability to rotate depending on the vacuum supplied to the vacuum regulator.
The switch is attached to the mudguard of the right front fender on an aluminum base that provides cooling.
The switch converts the pulses from the proximity sensor into control signals. The commutator consists of a cascade for generating the output signals of a proximity sensor (done as a trigger), an ignition timing control stage, an output amplification stage made according to the Darlington scheme and with a time delay.
Scheme of connection of the sensor-distributor of ignition with spark plugs
Ignition Distributor Sensor Details:
1 - gasket;
2 - flange;
3 - sealing ring;
4 - vacuum regulator;
5 - body;
6 - retaining rings;
7 - plate;
8 - protective screen;
9 - rotor;
10 - coal;
11 - cover of the sensor-distributor;
12 - interference suppression casing
An ignition coil adapted to this ignition system is installed next to the switch.
Visitor comments