Pumping the clutch hydraulic drive

Remove the protective cap from the bleeder on the working cylinder and attach a hose to it, lower the lower end of which into the brake fluid poured into a transparent glass vessel.

Slightly unscrew the bleeder screw, press the clutch pedal all the way down and slowly release the pedal.

Repeat the operation several times until air bubbles with brake fluid stop coming out of the hose.

Top up to the normal level of working fluid in the reservoir of the hydraulic clutch.

Screw on the bleed screw on the working cylinder and install the protective cap on it.

Check clutch operation and clutch pedal free play.