- 1 - bolt, 82 Nm
Access from luggage compartment: key size 16 mm.
- 2 - bracket
- 3 - guide piece
- 4 - sealing washer
- 5 - beam
- 6 - bolt with captive washer, 23 Nm
- 7 - bracket
- 8 - casing
- 9 — a bolt with a six-sided head
Removing
Unscrew bottom brackets. To do this, unscrew one bolt on the left and right.
On the luggage compartment side, using the SW16 wrench, unscrew the bumper fastening to the longitudinal beam.
Together with an assistant on both sides of the body, pull the bumper back parallel to the road from the side rails.
Remove rear bumper.
Installation
At the same time, slide the rear bumper into the side guides from both sides.
Tighten bolts securing bumper to stringer to 80 Nm.
Screw on the bottom brackets.
Visitor comments