- 1 - bolt, 35 Nm
Self-locking, always replace. Hold the guide pin while loosening and tightening.
- 2 - caliper body
- 3 - heat shield
- 4 - brake pads
Be sure to replace all overlays of one bridge. The wear limit is 7 mm, including the reverse side.
- 5 - brake shield
As a spare part, it is manufactured with guide pins and protective caps and supplied with the required amount of grease for the guide pins.
- 6 - guide pin
- 7 - protective cap
- 8 - bolt with ribbed head, 125 Nm
When reinstalling, clean the fins.
- 9 - countersunk screw
- 10 - brake disc
Always replace both discs of the same bridge.
- 11 - Phillips head screw
- 12 - wheel hub
- 13 - rotor for speed sensor
Only for cars with ABS.
- 14 - bolt, 10 Nm
- 15 - protective cover
- 16 - wheel bearing housing
- 17 — a bolt with an internal hexagon, 10 Nm
- 18 - speed sensor
Only for cars with ABS. Insert the sensor with solid lubricant VW-G000650.
Visitor comments