- 1 - axle trunnion
Attention: Straightening of the axle trunnion is not allowed. Only use pins with six mounting holes.
- 2 - protective cover
- 3 - Belleville spring
The large bearing surface faces the protective cover.
- 4 - bolt, 60 Nm
- 5 - sealing ring
Always replace, install with a suitable pipe.
- 6 - rotor
Only for vehicles with ABS.
- 7 - sealing ring
Fill between sealing lips with universal grease.
- 8 - inner wheel bearing
Knock out the outer clip with a copper pin.
- 9 - outer wheel bearing
Knock out the outer clip with a copper pin.
- 10 - pressure washer
- 11 - hex nut
For adjusting the radial clearance in a bearing.
- 12 - crown lock washer
- 13 - cotter pin
Always replace.
- 14 - protective cap
- 15 - brake disc
Before installing, fill the hub with bearing grease.
- 16 - bolt, 65 Nm
- 17 - brake shield
- 18 - protective cap
- 19 - guide pin
- 20 - brake pads
- 21 - bolt, 35 Nm
Self-locking, always replace.
- 22 — a support of the disk wheel brake mechanism
- 23 - brake hose holder
- 24 - spring stopper
- 25 - handbrake cable
- 26 - bolt with an internal hexagon
- 27 - speed sensor
Only in vehicles with ABS.
- 28 - hydraulic pipeline
Visitor comments