The tachometer shaft is inserted from the back of the instrument panel. In the installed position, the tachometer shaft is fixed by a compression spring on the drainage casing.
- A - instrument panel with a funnel-shaped cover for the tachometer shaft
- B - tachometer shaft
- 1 - seal on the partition saloon / drainage casing
- 2 - compression spring housing
- 3 - seal on the bulkhead drainage casing / engine compartment
- 4 - holder of the compression spring housing with a sealed connector
Removing
Remove instrument panel.
Turn cover from locking position -1- in direction of arrow until it can be removed from instrument panel in position -2-.
Installation
Insert cover, turn and lock.
Install the instrument panel.
Visitor comments