Diagnostics of malfunctions of injection systems K-Jetromic / Digifant

The following prerequisites must be met before fault diagnosis can be used to detect faults: Error conditions during start-up are excluded. Applies to both cold and warm engines: do not add gas before or during starting. After starting a hot engine, it may be necessary to add gas a little.

There must be fuel in the tank, the engine is mechanically sound, the battery is charged, the starter rotates with sufficient speed, the ignition control and the ignition system are in order, there are no leaks in the power supply system, fuel system contamination is excluded, the crankcase ventilation system is in order, electrical connections by weight (engine - gearbox - body) are available.

Attention: When the fuel lines are released, they must first be cleaned with gasoline.