- 1 - cable traction gear shift
- 2 - cable traction gear selection
Mount before installing shift cable.
- 3 - stopper
- 4 - cotter pin
- 5 - insulating element
Between the gear selector cable and the control arm.
- 6 - insulating element
Gear shift cable/shift lever.
- 7 - corrugated cover
- 8 - corrugated cover
- 9 - trunnion
- 10 - bolt, 15 Nm
Release only when adjusting the gear shift actuator.
- 11 - guide bolt
Treat with MoS grease before installation2.
- 12 - nut, 10 Nm
Self-locking, always replace.
- 13 - guide lever
Before removing the clutch drive, disconnect from the gearbox.
- 14 - gearshift lever
- 15 - bolt, 25 Nm
- 16 — bolt shoulder, 25 Nm
- 17 - counter-support
- 18 - bolts, 25 Nm
- 19 - nut, 15 Nm
- 20 - rubber washer
- 21 - insulating element
Between shift cable and track lever
- 22 - insulating element
Between the gear selector cable and the control arm.
Visitor comments