Heat the place of gluing with a lighter flame and remove the mirror.
Bonding directly to glass
The operation must be carried out at an ambient temperature of at least 20°C. Degrease the place of gluing the mirror on the glass with denatured alcohol and dry it thoroughly. Degrease the glued surface of the mirror base with denatured alcohol and dry it. Use a felt-tip pen to mark the position of the base of the mirror on the glass. After complete drying of the surfaces to be glued, apply 2 drops of Loctite, Teroson or other adhesive of the same type to the base of the mirror and spread it evenly. Press the base of the mirror firmly against the glass for several minutes without moving it.
Bonding with adhesive pad
Degrease the bonding surfaces of the glass and the base of the mirror as described above.
Remove the protective wrapping from the adhesive pad. Glue the gasket to the base of the mirror. Glue the base of the mirror to its original place according to the marked marks.
Visitor comments