Pic. 9-26. Front door lock details:
1 - outer handle of the lock drive;
2 — a socket of system of the central blocking of locks of doors;
3 - lock;
4 - lock off button;
5 - thrust;
6 - internal lock drive handle;
7 - latch.
Remove the door trim as described above. Carefully remove the soundproofing film from the inner door panel. Remove the lock drive handle. Depending on the car model, this operation is performed through the hole located under the lock or with a 3 mm drill. inserted into the hole at the bottom of the lock.
Loosen the lock screws and remove the lock (pic. 9-27).
The lock is installed in the reverse order of removal, taking into account the following:
- check clearance (free play of the lock handle) between the drive rod and the lock, which should be within 0.1-1.0 mm. If necessary, adjust the gap by turning the lock drive handle rod.
Visitor comments