Removal and installation of the brake mechanism of forward wheels

Raise the front of the car, put it on stands and remove the front wheels

Remove the brake fluid from the reservoir with a syringe.

Disconnect the hose from the wheel cylinder. Loosen the two bolts securing the shoe guide to the steering knuckle (pic. 7-11).



Unscrew the fitting for connecting the brake hose from the cylinder body and remove the shoe guide assembly with the caliper and shoes. Seal the hole for the brake hose fitting. Rinse all parts of the brake mechanism with alcohol, dry and check their condition.

Attach the brake hose to the wheel cylinder. Install the shoe guide assembly with the caliper on the steering knuckle, screw in the fastening bolts and tighten them to a torque of 12.5 kgf·m. Check and, if necessary, top up the brake fluid level in the reservoir. Bleed the air from the hydraulic drive system as follows. Install wheels. lower the car.