NOTE: Halogen headlight bulbs require careful handling. Do not touch lamp bulbs with your hands. Clean lamps with a lint-free cloth. In case of accidental contact with hands, clean the lamp bulb with a cloth moistened with alcohol.
Replacement of H4 halogen headlight bulbs
Open the hood and remove the protective plastic cap of the headlight. turning it to the left.
Disconnect headlight wire connector 1 (pic. 14).
Turn down the spring 2.
Remove the lamp, taking it by the connecting pin.
Insert a new lamp like this. so that the middle connecting pin 3 is at the top, and carry out the remaining installation steps in the reverse order of removal.
Replacing the front side light bulbs
Open the hood and remove the protective cap of the headlight.
Remove side light bulb 4 (pic. 14), by pushing the plinth and turning it to the left.
Replacing front turn signal bulbs
Open the hood and remove the socket with the turn signal lamp (pic. 15). turning it to the left.
Remove the bulb from the socket by turning it to the left.
Replacement of fog lamps
Use a screwdriver to remove pins 1 from studs 2 (pic. 16).
Remove pins 2 from cover 3.
Unscrew the three screws 4 and remove the headlight.
Disconnect wire connector 6 from lamp.
Detach the spring latch 7 from the lamp holder and move it to the side.
Take out the lamp.
When installing a new bulb, make sure that the fixing tabs of the headlight reflector fit into the recesses of the bulb cup.
Secure the lamp with a spring clip.
Replacing taillight bulbs
Light unit on the trunk lid Open the trunk lid a little.
Remove the holder with lamps by pressing the two latches 1 (pic. 17). Fender lamp unit. Open the trunk lid.
Remove the holder with lamps by pressing the two latches 1 (pic. 18).
Replacing the ceiling lamp
Carefully remove the cover diffuser with a screwdriver inserted into the slot between the diffuser and the cover body.
Visitor comments