Pic. 4-7. Clutch Hydraulic Parts:
1 - clutch pedal;
2 - the main cylinder of the clutch drive;
3 - bracket;
4 - hydraulic reservoir;
5 - connecting pipeline;
6 - fitting for pumping the hydraulic drive on the working cylinder;
7 - fitting for bleeding the hydraulic drive on the main cylinder;
8 - clutch slave cylinder;
9 - pusher.
Disconnect the fluid supply pipe from the reservoir and the pipe going to the working cylinder from the clutch master cylinder, placing a rag to protect the paintwork of body parts. Remove the clutch pedal spring clip and remove the pushrod from the axle. Loosen the two mounting nuts and remove the master cylinder.
Install the clutch master cylinder in the reverse order of removal, then bleed the clutch hydraulic drive and add fluid to the hydraulic drive reservoir to a normal level.
Visitor comments