Screw location (1) case fastenings (2) power window motor
Removing the Bosch power window motor rotor
- 1 - rotor,
- 2 - Hall sensor (used to protect against pinching by lifting window glass)
Loosening the fastening screws (1) corps (2) Siemens power window motor
Direction of rotation of the rotor (1) Siemens electric motor for lowering the door glass
If the power window does not work, the door glass can be lowered manually. To lower the door glass manually, follow the steps below.
1. Unscrew 4 screws (1) and remove the case (2) power window motor, see fig. Screw location (1) case fastenings (2) window motor.
2. On Bosch power window motors, remove the rotor (1) power window motor in the direction of the arrow shown in fig. Removing the Bosch power window motor rotor.
3. Press the door glass with your hands and lower it to the level of the technological holes in the door bracket.
4. On Siemens power window motors, unscrew the 4 screws (1), fixing the body (2) power window motor, see fig. Loosening the fastening screws (1) corps (2) Siemens power window motor).
5. Remove the power window motor housing.
Warning: Once the housing has been removed from the Siemens power window motor, the motor must not be used again.
6. By rotating the motor rotor counterclockwise, lower the door glass to the level of the technological holes in the door bracket, see fig. Direction of rotation of the rotor (1) Siemens electric motor for lowering the door glass.
Visitor comments