Removing the door lock can only be done together with the bracket.
The door bracket can only be removed after the door glass has been released from the power window retainers. To do this, lower the door glass to the level of the technological holes in the bracket and release the latches.
If electric windows are installed in the door and they are not working at the moment for some reason, you can lower the door glass manually.
Removing
Using a mandrel to release the latches (1) fixing the door lock to the bracket
Separation of the door lock from the bracket
- 1 - bracket,
- 2 - cable,
- 3 - screwdriver,
- 4 - door lock
Separation of the safety rod from the door lock
- 1 - safety rod,
- 2 - cable traction
1. Remove an upholstery of a forward door.
2. Remove the lock cylinder housing.
3. Release the lock on the outside door handle.
4. Remove the bracket with the units from the front door.
5. Using a mandrel, release the latches (1) fastenings of the lock of a door, see fig. Using a mandrel to release the latches (1) attaching the door lock to the bracket.
6. Release from mounting bracket (1) cable (2), see fig. Separation of the door lock from the bracket.
7. Using a screwdriver, separate the door lock with adapter bracket from the door bracket. The adapter bracket is attached to the door lock with a bolt and rivet.
8. Remove the safety rod from the door lock (1), for which turn the door lock in the direction of the arrow shown in fig. Separation of the safety rod from the door lock.
9. Release fastenings of a cover of cable draft to the lock of a door.
10. Rotate the cable tie 90°and remove it from the hole in the door lock lever.
Installation
1. Installation is made in sequence, return to removal.
2. Check the operation of the door lock.
Visitor comments