Mirror/Glass Mirror
- 1 - outside rear-view mirror,
- 2 - screw, 10 Nm,
- 3 - an internal decorative overlay of an external mirror,
- 4 - electrical connector,
- 5 - damper,
- 6 - mirror glass
Removing
1. To protect the mirror glass from damage, cover the bottom edge of the mirror with adhesive tape.
2. Using a thin piece of plastic, starting from the bottom, separate the mirror glass from the mirror body.
Installation
1. When installing, align mirror alignment pins and push mirror into housing.
2. If a new mirror glass is being installed, make sure it is the same type. The glass and mirror housing are identified on the reverse sides.
Warning: Wear gloves, press only in the center of the mirror.
Visitor comments